Poly-planar MRD-60 Especificaciones Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
10
Accessories
Remote Control of the radio is possible with a Poly Planar MRR2 Wire-
less infrared remote control. The IR port is located next to the volume
knob and must be in line of site for the remote to operate.
The Audio Expansion Port (Page 4) is designed to accommodate vari-
ous modules to enhance the capabilities of the system.
IMR-4: Input Output Module has 2 input ports and 3 Output ports
If an IMR-4 is installed the Audio ports on the back of the radio will be
disabled and the ports on the IMR-4 must be used for AU-1 and AU-2
functions.
The fixed level output port is used to feed a separate zone amp that has
it’s own volume control like the ME-50.
The Variable level outputs (Front & Rear , Right &Left) mimic the output
of the tuner. These outputs are generally used to feed a 2 or 4 channel
Amplifier where the volume is controlled by the MRD-60 Receiver.
For more information see the instructional material included with the IMR
-4.
Control Modules for Spa Applications: The MRD60 expansion port can
support control modules for full spa control applications. These are
OEM applications.
Module Connection Priority: Multiple modules can be attached to the
Expansion Port. Each Module has a Priority designation on the label.
Modules should be “Daisy Chained” in the Alfa Numeric order listed in the
labels. (B1-B3 C2 etc.)
IIMPORTANT! Disconnect power before installing Modules.
Auxiliary Inputs 1 & 2
The 2 RCA Type connections labeled AUX-IN-1 and AUX-IN-2 can be
used to input audio signals from other devices such as MP3 Players
and TV, DVD players.
Use the SOURCE button (3) to toggle to this input. The display will
show AU-1 or AU-2
Audio Output
The AUDIO OUT connection is used to output variable level audio from
the receiver to other devices such as zone amps or other systems.
The Output volume is determined by Volume setting on the receiver.
10
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios